| After-sales Service: | 1 Year |
|---|---|
| Warranty: | 1 Year |
| Structure: | Radial Drilling Machine |
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier 
| Specifications | Units | Z3080×25 | Z3063×20/1 |
| Max. drilling diameter | mm | 80 | 63 |
| Distance between spindle axis and column | mm | 500-2500 | 450-2000 |
| Distance spindle nose and working surface of base | mm | 550-2000 | 400-1600 |
| Spindle travel | mm | 450 | 400 |
| Spindle taper | Morse No. | 6# | 5# |
| Range of spindle speeds | rpm | 16-1250 | 20-2000 |
| Number of spindle speeds | step | 16 | 16 |
| Range of spindle feeds | mm/r | 0.04-3.20 | 0.04-3.20 |
| Number of spindle feeds | step | 16 | 16 |
| Table size | mm | 1000×800 | 800×630 |
| Distance of headstock horizontal movement | mm | 2000 | 1600 |
| Spindle motor power | KW | 7.5 | 5.5 |
| Machine weight | Kg | 11000 | 7000 |
| Overall dimension | mm | 3730×1400×4025 | 3080×1250×3400 |
Radial drilling machine is a kind of general-purpose drilling equipment, which has the characteristics of wide range of use, flexible and convenient operation, etc. How does radial drilling machine drill holes on general workpieces.
1. Draw a line on the workpiece according to the requirements of the drawing, and punch the hole after inspection. The sample punching hole should be made larger so that the drill bit is not easy to deviate from the center.
2. Adjust the required speed and feed rate, and prepare the required cutting fluid.
3. According to the material characteristics and process requirements, sharpen the cutting angle of the drill bit.
4. Align the drill tip with the center of the drill hole. When setting the knife, observe from two vertical directions.
5. If the drilling is deviated, it must be corrected in time. The method of correction is: use oil groove chisel to chisel several grooves on the opposite side of the hole deviation for larger holes, and use sample punching for smaller holes. Drilling small holes can also be raised with horns in the direction of deflection. Then try drilling until the round dimple is corrected, remove the pad iron, and continue drilling.
6. When drilling through holes, it is best to switch to manual feeding when drilling through quickly.
7. If the hole cannot be drilled, the automatic feed stopper can be adjusted according to the hole depth before drilling.
8. When drilling deep holes, when the hole depth reaches more than 3 times the diameter, the drill bit must be withdrawn several times to remove chips.
9. When the drilling diameter is less than 35mm, it can be drilled at one time, and when it is larger than 35mm, it can be drilled twice. At this time, the diameter of the pre-drilled hole is 0.7 times the machining diameter.
We also can manufacture CNC vertical turret milling machines as per your special requirements.
Advantages:
A. Are Slide ways Hardened & Hand Scraped? - Yes, Hardened & Ground
Induction hardened and ground X& Y slideways
Hardened and ground table top
Turcite B coated on X & Y slideways
Main spindle hardened and ground
B. Do you use Spindle Bearing as High Precision FAG make Spindle Bearings or NSK Bearings,?- Depending upon the supply, we use FAG/NSk/SKF/BRZ
C. Milling Head & Lead Screw are made of Taiwan or China - TAIWAN
D. DRO make is SINO or Esson or Delos ?- As per your choice.
E. Casting Quality for entire machine Body?- We are the second largest manufacturer in China, we produce good quality machine. In last year we exported more than 1000 machines.
Standard accessories:
(1)Coolant system
(2) Machine bed
(3)Tool box with one set of tools
(4)Electric box
(5)Pull rod
(6)Worktable elevating handle
(7)Spindle elevating handle
(8)Spindle fine adjustment handle
(9)Working lamp
(10)R8 collect kit set
(11) Iron Scraper
Weifang Runlian Economic and Trade Co., Ltd. was established in 2011, Is a professional domestic high-end machine tool equipment And accessories import and export enterprise, metal cutting machine tools, metal cutting tools, Grinder abrasives, measuring tools, machine tool functional parts, numerical control devices, metal forming machine tools, lubricate grease and oil Machine function parts, numerical control devices (CNC), Metal forming machine, mechanical processing technology consulting business, adhering to the core value of "customer satisfaction is our purpose", With the core cultural concept of "team, responsibility, communication, tolerance", Take advantage of nearly 20 years of industry experience to provide global customers with the most suitable industry products to create the greatest value, to become a world-class industrial service provider.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}