| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Warranty: | 1 Year |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| unit | Z3050x16/1 | |||
| Worktable :- | ||||
| Dimensions of Box Table | mm | 630x500x500 | ||
| T/T slot of box table | no | 5/22/150 | ||
| Dimensions of Base | mm | 2400x1000x200 | ||
| Working Surface of Base Plate | mm | 830X1660 | ||
| T/T slot of base | 4/28/180 | |||
| Max. load of worktable | kg | |||
| Machining range :- | ||||
| spindle axis to column | mm | 350-1600 | ||
| spindle nose to table surface | mm | 320-1220 | ||
| spindle head travel(horizontal) | mm | 1250 | ||
| Spindle :- | ||||
| Spindle taper | MT5 | |||
| quill travel | mm | 315 | ||
| Max.drilling diameter | mm | 50(steel) | ||
| Max.tapping diameter | mm | M16*2(steel) M20*2.5(Cast iron) | ||
| spindle Speed Range /steps | rpm | 25-2000/16setps | ||
| Max.spindle torque | Nm | 500 | ||
| spindle feed/steps | 0.04-3.2/16steps | |||
| Motor:- | ||||
| spindle motor power | kw | 4 | ||
| elevating motor for Arm | kw | 1.5 | ||
| coolant pump | kw | 0.09 | ||
| Others:--- | ||||
| clamping type | Hydraulic clamping for longitudinal,vertical and radial movement | |||
| overall dimension (L*W*H) | mm | 2480x1040x2750 | ||
| package dimension (L*W*H) | mm | 2580x1140x2550 | ||
| Machine tool net weight | kg | 3500 | ||
| Specifications | Units | Z3080×25 | Z3063×20/1 |
| Max. drilling diameter | mm | 80 | 63 |
| Distance between spindle axis and column | mm | 500-2500 | 450-2000 |
| Distance spindle nose and working surface of base | mm | 550-2000 | 400-1600 |
| Spindle travel | mm | 450 | 400 |
| Spindle taper | Morse No. | 6# | 5# |
| Range of spindle speeds | rpm | 16-1250 | 20-2000 |
| Number of spindle speeds | step | 16 | 16 |
| Range of spindle feeds | mm/r | 0.04-3.20 | 0.04-3.20 |
| Number of spindle feeds | step | 16 | 16 |
| Table size | mm | 1000×800 | 800×630 |
| Distance of headstock horizontal movement | mm | 2000 | 1600 |
| Spindle motor power | KW | 7.5 | 5.5 |
| Machine weight | Kg | 11000 | 7000 |
| Overall dimension | mm | 3730×1400×4025 | 3080×1250×3400 |
Radial drilling machine is a kind of general-purpose drilling equipment, which has the characteristics of wide range of use, flexible and convenient operation, etc. How does radial drilling machine drill holes on general workpieces.
1. Draw a line on the workpiece according to the requirements of the drawing, and punch the hole after inspection. The sample punching hole should be made larger so that the drill bit is not easy to deviate from the center.
2. Adjust the required speed and feed rate, and prepare the required cutting fluid.
3. According to the material characteristics and process requirements, sharpen the cutting angle of the drill bit.
4. Align the drill tip with the center of the drill hole. When setting the knife, observe from two vertical directions.
5. If the drilling is deviated, it must be corrected in time. The method of correction is: use oil groove chisel to chisel several grooves on the opposite side of the hole deviation for larger holes, and use sample punching for smaller holes. Drilling small holes can also be raised with horns in the direction of deflection. Then try drilling until the round dimple is corrected, remove the pad iron, and continue drilling.
6. When drilling through holes, it is best to switch to manual feeding when drilling through quickly.
7. If the hole cannot be drilled, the automatic feed stopper can be adjusted according to the hole depth before drilling.
8. When drilling deep holes, when the hole depth reaches more than 3 times the diameter, the drill bit must be withdrawn several times to remove chips.
9. When the drilling diameter is less than 35mm, it can be drilled at one time, and when it is larger than 35mm, it can be drilled twice. At this time, the diameter of the pre-drilled hole is 0.7 times the machining diameter.
Weifang Runlian Economic and Trade Co., Ltd. was established in 2011, Is a professional domestic high-end machine tool equipment And accessories import and export enterprise, metal cutting machine tools, metal cutting tools, Grinder abrasives, measuring tools, machine tool functional parts, numerical control devices, metal forming machine tools, lubricate grease and oil Machine function parts, numerical control devices (CNC), Metal forming machine, mechanical processing technology consulting business, adhering to the core value of "customer satisfaction is our purpose", With the core cultural concept of "team, responsibility, communication, tolerance", Take advantage of nearly 20 years of industry experience to provide global customers with the most suitable industry products to create the greatest value, to become a world-class industrial service provider.
){kind=link}