Product Description
Cnc drilling machine
Radial Drilling Machine Model Z3050×13, which has a wide range of application, are suitable for drilling, counter-boring, reaming, spot-facing and tapping on large and medium size object. It has many strong points as follows: The key parts were adopted high strength cast iron and special steel, this make it has more stability. It is more durable because it is processed through first-class technology After the continuous treating by specialized equipment, it guarantees the basic parts have excellent quality. The hydraulic pressure system tightens each part greatly. 16 range of spindle turning speed for your choice makes it drilling highly effectively. All the hydraulic control equipment concentrate in the head stock, which facilitates the operation greatly. Novel design of outward appearance and painting demonstrate the time style.
Product Parameters
Project |
Unit |
Z3080X25 |
Z3050X16/1 |
Z3040X13/2 |
Z3032X10/1 |
Maximum drilling diameter |
mm |
80 |
50 |
40 |
32 |
Distance from spindle centerline to column generatrix |
Maximum (mm) |
2500 |
1600 |
1300 |
1000 |
|
Minimum (mm) |
500 |
350 |
300 |
300 |
Distance from spindle end to base working surface |
Maximum (mm) |
2000 |
1220 |
1120 |
1000 |
|
Minimum (mm) |
550 |
320 |
300 |
220 |
Spindle travel |
mm |
450 |
315 |
280 |
280 |
Spindle taper hole (Morse) |
No. |
6# |
5# |
4# |
4# |
Spindle speed range |
r/min |
16-1250 |
25-2000 |
32-2500 |
32-2500 |
Spindle speed level |
level |
16 |
16 |
16 |
16 |
Spindle feed range |
mm |
0.04-3.2 |
0.04-3.2 |
0.10-1.25 |
0.10-1.25 |
Spindle feed level |
level |
16 |
16 |
8 |
8 |
Workbench size |
mm |
1000x800x560 |
500x500x630 |
550x450x450 |
550x450x450 |
Horizontal moving distance of the spindle box (cross arm) |
mm |
2000 |
1250 |
1000 |
700 |
Maximum allowable torque of the spindle |
Nm |
35000 |
500 |
250 |
200 |
Spindle motor power |
kW |
7.5 |
4 |
3 |
2.2 |
Rocker arm lifting distance |
mm |
1000 |
580 |
540 |
500 |
Machine weight |
kg |
11000 |
3500 |
2500 |
1600 |
Machine tool dimensions (length × width × height) |
mm |
3730x1400x3790 |
2500x1070x2840 |
2100x900x2310 |
1760x800x2050 |
Machine tool packaging dimensions (length × width × height) |
mm |
3820x1630x1700 |
2690x1190x2570 |
2320x1050x2550 |
1970x950x2280 |
Instructions
Radial drilling machine is a kind of general-purpose drilling equipment, which has the characteristics of wide range of use, flexible and convenient operation, etc. How does radial drilling machine drill holes on general workpieces.
1. Draw a line on the workpiece according to the requirements of the drawing, and punch the hole after inspection. The sample punching hole should be made larger so that the drill bit is not easy to deviate from the center.
2. Adjust the required speed and feed rate, and prepare the required cutting fluid.
3. According to the material characteristics and process requirements, sharpen the cutting angle of the drill bit.
4. Align the drill tip with the center of the drill hole. When setting the knife, observe from two vertical directions.
5. If the drilling is deviated, it must be corrected in time. The method of correction is: use oil groove chisel to chisel several grooves on the opposite side of the hole deviation for larger holes, and use sample punching for smaller holes. Drilling small holes can also be raised with horns in the direction of deflection. Then try drilling until the round dimple is corrected, remove the pad iron, and continue drilling.
6. When drilling through holes, it is best to switch to manual feeding when drilling through quickly.
7. If the hole cannot be drilled, the automatic feed stopper can be adjusted according to the hole depth before drilling.
8. When drilling deep holes, when the hole depth reaches more than 3 times the diameter, the drill bit must be withdrawn several times to remove chips.
9. When the drilling diameter is less than 35mm, it can be drilled at one time, and when it is larger than 35mm, it can be drilled twice. At this time, the diameter of the pre-drilled hole is 0.7 times the machining diameter.
related products
Company Profile
FAQ
1:How can I choose the most suitable machines ?
A: Please tell me your specifications ,we can choose the best model for you , or you can choose the exact model .
You can also send us the products drawing ,we will choose the most suitable machines for you .
2: What's your main products of your company?
A: We specialized in all kinds of machines ,such as CNC Lathe Machine ,CNC Milling Machine ,Vertical Machining Center ,Lathe Machines ,Drilling Machine ,Radial Drilling Machine ,Sawing Machine ,Shaper machine and so on .
3: Where is our factory located? How can I visit there?
A : Our factory is located in Tengzhou City ,Shandong Province,277500 China. You are warmly welcomed to visit us.
4. What is your trade terms?
A : FOB, CFR and CIF all acceptable.
5: What's the Payment Terms ?
A : T/T ,30% initial payment when order ,70% balance payment before shipment ;
Irrevocable LC at sight .
6: What's the MOQ?
A: 1 set .(Only some low cost machines will be more than 1 set ).